Read a report from a photo (AI)
No PDF of the roof report? Photograph or screenshot the page with the measurements on it and AI pulls the squares, pitch and linear feet straight into the job.
4 min3 steps
- 1
Open “Read from photo”
On the job’s “Measure the roof” card, click “Read from photo.”
- 2
Snap or upload
Take a picture or upload a screenshot of the report page with the measurements (the image is compressed automatically).
- 3
Check what it read
It saves straight to the job — there is no confirm step. Check Squares and Pitch against the report, and use Remove on the measurement if it read one wrong.
Still stuck? Ask the Ask RidgeSync assistant in the bottom-right, or email our support team.